Insite SiteWork / Field General Patches

InSite SiteWork / Field General patch for 12.0.47, 12.0.48, 12.0.50 and 12.0.51

Builds 47, 48, 50 will lose user default settings if started without the security key. Customer Jobs are not affected. This patch also supports some newer vector files previously not supported.

 After patching the version will become 12.0.52.

 A new disk has been sent to all users of 12.0.46 as no patch is available.

NOTE: You will need your original installation disk.

Please remove your hardware key before installation.

You must be an administrator on the computer to install the patch.

Accept all install prompts.

When promted for the InSite SiteWork disk, put your original InSite SiteWork release 12.0.47, 48, 50 or 51 DVD in the drive and click on OK. If you get an "invalid path" message then click on Browse and navigate to the DVD drive and select InSite Software.msi and click OK

 

Click here to download this patch

 

 

 InSite SiteWork / Field General patch for 11.1.173, 11.1.176 or 11.1.189

This patch prevents recurring "File or Path Not Found" warnings that may appear when restoring a Job to a different computer or when the path to the Documents folder is redirected when the computer is not logged onto a network. After patching the version will become 11.1.208.  

NOTE: Please remove your hardware key before installation.  You may need your original installation disk.

Click here to download this patch

 

InSite SiteWork / Field General patch for 8.0.98. This patch is for cases where there is an installation problem with 8.0.98. there are no new program features. After installation, the version number will not change.

After you click on the patch (below) choose Open from the File download screen. Confirm any security related screens. Select WINSITE.EXE from the unzipped file list. When prompted for a password use sitework (lower case) and run the file.

NOTE: Please remove your hardware key before installation.  You may need your original installation disk.

Click here to download the 8.0.98 patch

 

InSite SiteWork / Field General Version 7.0.17 patch.  This patch fixes a problem with the Split/Select tool in InSite SiteWork.

Requirements: InSite SiteWork or Field General 7.0.15 running on Windows XP SP2 or Vista. Click Help / About InSite SiteWork to check your version.

Installation: Close InSite SiteWork and all other programs. Remove all Rainbow USB Security keys. Click below to download the patch. Choose Open, and run the executable. Accept all of the screens without any changes.

When finished, Insert the InSite SiteWork Rainbow key. Wait until the key is recognized, usually giving two messages, 1. New Hardware Found and 2. New Hardware Installed and Ready to Use. A new CD key code will not be needed.

NOTE: You may need your original installation disk.

You can confirm the new version number in Help / About InSite.

Click here to download the 7.0.17 patch

 

InSite SiteWork / Field General 6.1.58 Patch

This patch is for customers running non-current 6.1 versions of InSite SiteWork.

Requirements: InSite SiteWork or Field General 6.1.54, 55, 56 or 57 running on Windows XP SP2. Click Help / About InSite SiteWork to check your version.

Installation: Close InSite SiteWork and all other programs. Remove all Rainbow USB Security keys. Click below to download the patch. Choose Open, and run the executable. Accept all of the screens without any changes.

When finished, Insert the InSite SiteWork Rainbow key. Wait until the key is recognized, usually giving two messages, 1. New Hardware Found and 2. New Hardware Installed and Ready to Use. A new CD key code will not be needed.

You can confirm the new version number in Help / About InSite.

Fixes in 6.1.58 Patch

  • File manager – Moved warning that the user has changed the data drive to occur before moving off the field.
  • Boring Log – Corrected shading of unused cells and fixed loss of water table display on regridding.
  • CAD Import – Fixed display problem of layers window with 800x600 screen resolution. Fixed need to regrid when overwriting a previous import.
  •  Fixed Scale Checker changing the scale but not adjusting the locator points. Fixed error when trying to change color of last layer in layer list.
  • Site and Pipe Profiles – Fixed water table not displaying or printing.
  • Pipe, Existing, Proposed – Fixed multiple digitizer warning messages.
  • Import ASCII - Fixed alignment points not found if last point in file is an alignment point.

The patch does not update the User Manual in Help and does not modify the Sample Job.

Click here to download the 6.1.58 patch